DA050001 / Damper Act On/Off or 3 Point 24V, 5Nm, 2 Aux Sw
Specifications:
- Torque: 5 Nm
- Damper size: ≤1 m2(see details in the manual)
- Direction of rotation: set by knob
- Position indicator: mechanical
- Manual override: set by push button
- Angle of rotation: max. 95°
- Running time: 120s
- Connection shaft: circular Φ6~15mm, square 4.5~11mm, min. length 43mm
- Control Signal: on/off, 3 pos; 0~10V (input impedance 250kΩ); 4~20 mA (input impedance 200Ω); RS485/Modbus
- Internal feedback: 0(2)~10VDC (max. output 1mA); 4~20mA (max. load 500Ω); RS485/Modbus-RTU
- Internal switch: 2×SPDT, 0.5A/30VDC
- External position switch: 1 or 2, SPDT, 0.5A/250VAC, must be ordered separately, see External Position Switch
- Electrical connection: screw terminal
- Mode of operation: Type 1 to EN60730-1
- Work temp.: -30~50°C, 95%RH, no cond. (EN60730-1)
- Storage temp.: -40~80°C
- Noise level: ≤35dB
- Protection: IP54
- Weight: 0.58kg (24V models)
- Approval: CE
DA050001 Damper Actuator, 5Nm Series
Description
DA050001 Damper Actuator, 5Nm Series
The DA050001 Damper Actuator provides reliable control for small to medium air dampers. It features a powerful torque of 5Nm to ensure smooth operation. This model is perfect for dampers up to 1 square meter in size. You can achieve precise ventilation management in any commercial building. Check out our full range of parts in the HVAC Actuator Category
Key Features of the DA050001 Damper Actuator
This device offers several user-friendly features for easy operation. You can set the direction of rotation quickly using a built-in knob. A mechanical position indicator shows the current damper status at a glance. The unit also includes a manual override button. This push-button allows you to adjust the damper by hand during maintenance. You can read more about air damper standards (Outbound Link) to optimize your system.
High Performance and Speed
The actuator offers a maximum rotation angle of 95 degrees. It completes its full travel in approximately 120 seconds. This steady running time prevents sudden pressure spikes in your ductwork. The DA050001 Damper Actuator ensures a constant and comfortable indoor climate. It operates quietly and efficiently in various ventilation setups. This performance helps reduce energy waste in large HVAC systems.
Versatile Shaft Compatibility
Installation is simple due to the flexible connection design. The actuator supports circular shafts between 6mm and 15mm in diameter. It also works with square shafts ranging from 4.5mm to 11mm. Make sure your connection shaft has a minimum length of 43mm for a secure fit. This wide compatibility makes it a great replacement motor for many different brands.
Durable Industrial Design
This series is built to last in demanding industrial environments. Its compact housing allows for installation in narrow ceiling spaces or tight ducts. The rugged construction ensures a long service life with very little maintenance. Choosing the DA050001 Damper Actuator provides a cost-effective solution for your airflow needs. It combines industrial-grade strength with precise digital control.
Reviews
There are no reviews yet.